[cisco-voip] Load Balance between SIP dial-peers

[Hussam Ahmad]

OK, could you please describe the topology?

do you have two routers with two links in-between or one router connected to
two routers?

 


Thanks and best regards,

 

HUSSAM AHMAD

Cisco Instructor | Sigma IT - Saudi Arabia


LOGO6.png


Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA

Tel: +966-1-2150100

Fax: +966-1-2151090

Mobile: +966-55-3266244

Email:  <mailto:hahmad at sigma-it.net> hahmad at sigma-it.net

Website:  <http://www.sigma-it.net/> www.sigma-it.net

----------------------------------------------------------------------------
--------------------------

This e-mail communication and any attachments thereto contain information
which is confidential and are intended only for the use of the individuals
or entities named above. If you are not the intended recipient, you are
hereby notified that any disclosure, copying, distribution or the taking any
action in reliance on the contents of these documents is strictly prohibited
and may be illegal. Please notify us of your receipt of this e-mail in error
and delete the e-mail and any copies of it

 

 

From: Mark Holloway [mailto:mh at markholloway.com] 
Sent: Wednesday, December 09, 2009 7:57 PM
To: Hussam Ahmad
Cc: 'Ali El Moussaoui'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Load Balance between SIP dial-peers

 

Are you sure about that?  The expected behavior when creating two dial peers
with identical destination patterns but different session targets is the
lowest numbered dial peer is always used first and if the session target is
not available the next dial peer is used.  Although this does provided
redundancy it's not load balancing.

 

On Dec 9, 2009, at 1:46 AM, Hussam Ahmad wrote:





Configure the dial-peers without any preference and it will work as you want
if the destination-pattern is the same.

Make it and use debug voice dial-peer in to verify it.

 

Waiting for your reply.

 


Thanks and best regards,

 

HUSSAM AHMAD

 

	
	

 

 

From: Ali El Moussaoui [mailto:mousawi.ali at gmail.com] 
Sent: Wednesday, December 09, 2009 11:43 AM
To: Hussam Ahmad
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Load Balance between SIP dial-peers

 

they have different session targets

On Wed, Dec 9, 2009 at 10:21 AM, Hussam Ahmad <hahmad at sigma-it.net> wrote:

You can but why do you need it, because how the first dial-peer will go
down.

 


Thanks and best regards,

 

HUSSAM AHMAD

Cisco Instructor | Sigma IT - Saudi Arabia


<image001.png>


Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA

Tel: +966-1-2150100

Fax: +966-1-2151090

Mobile: +966-55-3266244

Email:  <mailto:hahmad at sigma-it.net> hahmad at sigma-it.net

Website:  <http://www.sigma-it.net/> www.sigma-it.net

----------------------------------------------------------------------------
--------------------------

This e-mail communication and any attachments thereto contain information
which is confidential and are intended only for the use of the individuals
or entities named above. If you are not the intended recipient, you are
hereby notified that any disclosure, copying, distribution or the taking any
action in reliance on the contents of these documents is strictly prohibited
and may be illegal. Please notify us of your receipt of this e-mail in error
and delete the e-mail and any copies of it

 

 

From: Ali El Moussaoui [mailto:mousawi.ali at gmail.com] 
Sent: Wednesday, December 09, 2009 11:18 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Load Balance between SIP dial-peers

 

Hello Guys,

Is it possible to Load balance between 2 sip dial-peers ?

Ali

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091209/a95b7990/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 11742 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091209/a95b7990/attachment.png>