[cisco-voip] Load Balance between SIP dial-peers

[Ali El Moussaoui]

Its one router connected to 2 different targets and i think what Mark
mentioned is true.

On Wed, Dec 9, 2009 at 7:03 PM, Hussam Ahmad <hahmad at sigma-it.net> wrote:

>  OK, could you please describe the topology?
>
> do you have two routers with two links in-between or one router connected
> to two routers?
>
>
>
> Thanks and best regards,
>
> * *
>
> *H**USSAM** **A**HMAD***
>
> Cisco Instructor | Sigma IT – Saudi Arabia
>
> [image: LOGO6.png]
>
> Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA
>
> Tel: +966-1-2150100
>
> Fax: +966-1-2151090
>
> Mobile: +966-55-3266244
>
> Email: hahmad at sigma-it.net
>
> Website: www.sigma-it.net
>
>
> ------------------------------------------------------------------------------------------------------
>
> This e-mail communication and any attachments thereto contain information
> which is confidential and are intended only for the use of the individuals
> or entities named above. If you are not the intended recipient, you are
> hereby notified that any disclosure, copying, distribution or the taking any
> action in reliance on the contents of these documents is strictly prohibited
> and may be illegal. Please notify us of your receipt of this e-mail in error
> and delete the e-mail and any copies of it
>
>
>
>
>
> *From:* Mark Holloway [mailto:mh at markholloway.com]
> *Sent:* Wednesday, December 09, 2009 7:57 PM
> *To:* Hussam Ahmad
> *Cc:* 'Ali El Moussaoui'; cisco-voip at puck.nether.net
>
> *Subject:* Re: [cisco-voip] Load Balance between SIP dial-peers
>
>
>
> Are you sure about that?  The expected behavior when creating two dial
> peers with identical destination patterns but different session targets is
> the lowest numbered dial peer is always used first and if the session target
> is not available the next dial peer is used.  Although this does provided
> redundancy it's not load balancing.
>
>
>
> On Dec 9, 2009, at 1:46 AM, Hussam Ahmad wrote:
>
>
>
>   Configure the dial-peers without any preference and it will work as you
> want if the destination-pattern is the same.
>
> Make it and use debug voice dial-peer in to verify it.
>
>
>
> Waiting for your reply.
>
>
>
> Thanks and best regards,
>
> * *
>
> *H**USSAM** **A**HMAD*
>
>
>
>
>
>
>
> *From:* Ali El Moussaoui [mailto:mousawi.ali at gmail.com]
> *Sent:* Wednesday, December 09, 2009 11:43 AM
> *To:* Hussam Ahmad
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Load Balance between SIP dial-peers
>
>
>
> they have different session targets
>
> On Wed, Dec 9, 2009 at 10:21 AM, Hussam Ahmad <hahmad at sigma-it.net> wrote:
>
> You can but why do you need it, because how the first dial-peer will go
> down.
>
>
>
> Thanks and best regards,
>
> * *
>
> *H**USSAM** **A**HMAD*
>
> Cisco Instructor | Sigma IT – Saudi Arabia
>
> <image001.png>
>
> Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA
>
> Tel: +966-1-2150100
>
> Fax: +966-1-2151090
>
> Mobile: +966-55-3266244
>
> Email: hahmad at sigma-it.net
>
> Website: www.sigma-it.net
>
>
> ------------------------------------------------------------------------------------------------------
>
> This e-mail communication and any attachments thereto contain information
> which is confidential and are intended only for the use of the individuals
> or entities named above. If you are not the intended recipient, you are
> hereby notified that any disclosure, copying, distribution or the taking any
> action in reliance on the contents of these documents is strictly prohibited
> and may be illegal. Please notify us of your receipt of this e-mail in error
> and delete the e-mail and any copies of it
>
>
>
>
>
> *From:* Ali El Moussaoui [mailto:mousawi.ali at gmail.com]
> *Sent:* Wednesday, December 09, 2009 11:18 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Load Balance between SIP dial-peers
>
>
>
> Hello Guys,
>
> Is it possible to Load balance between 2 sip dial-peers ?
>
> Ali
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/f3e7bfdc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 11742 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/f3e7bfdc/attachment.png>