[cisco-voip] Load Balance between SIP dial-peers

[Erick Bergquist]

You can do this for outbound calls using dial-peers, need to adjust the
global dial-peer hunt method. I've done it awhile ago for someone who had
SIP IVRs and wanted to load balance the calls between them.

I can dig up the dial-peer config stuff if needed.

On Thu, Dec 10, 2009 at 12:53 AM, Ali El Moussaoui <mousawi.ali at gmail.com>wrote:

> Its one router connected to 2 different targets and i think what Mark
> mentioned is true.
>
>
> On Wed, Dec 9, 2009 at 7:03 PM, Hussam Ahmad <hahmad at sigma-it.net> wrote:
>
>>  OK, could you please describe the topology?
>>
>> do you have two routers with two links in-between or one router connected
>> to two routers?
>>
>>
>>
>> Thanks and best regards,
>>
>> * *
>>
>> *H**USSAM** **A**HMAD***
>>
>> Cisco Instructor | Sigma IT – Saudi Arabia
>>
>> [image: LOGO6.png]
>>
>> Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA
>>
>> Tel: +966-1-2150100
>>
>> Fax: +966-1-2151090
>>
>> Mobile: +966-55-3266244
>>
>> Email: hahmad at sigma-it.net
>>
>> Website: www.sigma-it.net
>>
>>
>> ------------------------------------------------------------------------------------------------------
>>
>> This e-mail communication and any attachments thereto contain information
>> which is confidential and are intended only for the use of the individuals
>> or entities named above. If you are not the intended recipient, you are
>> hereby notified that any disclosure, copying, distribution or the taking any
>> action in reliance on the contents of these documents is strictly prohibited
>> and may be illegal. Please notify us of your receipt of this e-mail in error
>> and delete the e-mail and any copies of it
>>
>>
>>
>>
>>
>> *From:* Mark Holloway [mailto:mh at markholloway.com]
>> *Sent:* Wednesday, December 09, 2009 7:57 PM
>> *To:* Hussam Ahmad
>> *Cc:* 'Ali El Moussaoui'; cisco-voip at puck.nether.net
>>
>> *Subject:* Re: [cisco-voip] Load Balance between SIP dial-peers
>>
>>
>>
>> Are you sure about that?  The expected behavior when creating two dial
>> peers with identical destination patterns but different session targets is
>> the lowest numbered dial peer is always used first and if the session target
>> is not available the next dial peer is used.  Although this does provided
>> redundancy it's not load balancing.
>>
>>
>>
>> On Dec 9, 2009, at 1:46 AM, Hussam Ahmad wrote:
>>
>>
>>
>>   Configure the dial-peers without any preference and it will work as you
>> want if the destination-pattern is the same.
>>
>> Make it and use debug voice dial-peer in to verify it.
>>
>>
>>
>> Waiting for your reply.
>>
>>
>>
>> Thanks and best regards,
>>
>> * *
>>
>> *H**USSAM** **A**HMAD*
>>
>>
>>
>>
>>
>>
>>
>> *From:* Ali El Moussaoui [mailto:mousawi.ali at gmail.com]
>> *Sent:* Wednesday, December 09, 2009 11:43 AM
>> *To:* Hussam Ahmad
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] Load Balance between SIP dial-peers
>>
>>
>>
>> they have different session targets
>>
>> On Wed, Dec 9, 2009 at 10:21 AM, Hussam Ahmad <hahmad at sigma-it.net>
>> wrote:
>>
>> You can but why do you need it, because how the first dial-peer will go
>> down.
>>
>>
>>
>> Thanks and best regards,
>>
>> * *
>>
>> *H**USSAM** **A**HMAD*
>>
>> Cisco Instructor | Sigma IT – Saudi Arabia
>>
>> <image001.png>
>>
>> Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA
>>
>> Tel: +966-1-2150100
>>
>> Fax: +966-1-2151090
>>
>> Mobile: +966-55-3266244
>>
>> Email: hahmad at sigma-it.net
>>
>> Website: www.sigma-it.net
>>
>>
>> ------------------------------------------------------------------------------------------------------
>>
>> This e-mail communication and any attachments thereto contain information
>> which is confidential and are intended only for the use of the individuals
>> or entities named above. If you are not the intended recipient, you are
>> hereby notified that any disclosure, copying, distribution or the taking any
>> action in reliance on the contents of these documents is strictly prohibited
>> and may be illegal. Please notify us of your receipt of this e-mail in error
>> and delete the e-mail and any copies of it
>>
>>
>>
>>
>>
>> *From:* Ali El Moussaoui [mailto:mousawi.ali at gmail.com]
>> *Sent:* Wednesday, December 09, 2009 11:18 AM
>> *To:* cisco-voip at puck.nether.net
>> *Subject:* [cisco-voip] Load Balance between SIP dial-peers
>>
>>
>>
>> Hello Guys,
>>
>> Is it possible to Load balance between 2 sip dial-peers ?
>>
>> Ali
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/a5e76b66/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 11742 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/a5e76b66/attachment.png>