[cisco-voip] Dual company on a single CME

[Lelio Fulgenzi]

yes. cor lists are a must. 

plus, you can only provide outside dial tone for one access code from what i recall. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Matthew Saskin" <msaskin at gmail.com> 
To: "Hussam Ahmad" <hahmad at sigma-it.net> 
Cc: cisco-voip at puck.nether.net 
Sent: Thursday, December 10, 2009 8:18:11 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Dual company on a single CME 


Bad idea without corlists. All it takes is one tenant using the other tenant's access code and outbound calls use the incorrect PSTN trunk and cost the incorrect tenant money... 

Matthew Saskin 
msaskin at gmail.com 
203-253-9571 



On Sun, Dec 6, 2009 at 3:15 AM, Hussam Ahmad < hahmad at sigma-it.net > wrote: 


You can control it via dial plan for example 
First company can use 9 as an access code (i.e. 9XXXXXXXXXX) 
Second company can use 8 as an access code (i.e. 8XXXXXXXXXX) 

Thanks and best regards, 

HUSSAM AHMAD 
------------------------------------------------------------------------------------------------------ 
This e-mail communication and any attachments thereto contain information which is confidential and are intended only for the use of the individuals or entities named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking any action in reliance on the contents of these documents is strictly prohibited and may be illegal. Please notify us of your receipt of this e-mail in error and delete the e-mail and any copies of it 





-----Original Message----- 
From: Mirko Maffioli [mailto: mirkomaffioli at emisfera.it ] 
Sent: Saturday, November 28, 2009 11:33 AM 
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] Dual company on a single CME 

Hi, 

On a single CME with 2 BRI line is it possible to have two different 
companies and to separate the outgoing traffic (one company for each 
bri)? 

Thank you 
Mirko 

-- 
Cordiali saluti 
Mirko Maffioli 

Emisfera Società cooperativa 
CO-VER R&K 
Via Quarantadue Martiri, 165 
28924 Verbania - Italia 
Iscr. Albo Coop. A113148 - Sez. cooperative a mutualità prevalente 
tel + 39.0323.586730 - 0323.586216 
fax + 39.0323.586937 
mob + 39.3483399583 

mail: mirkomaffioli at emisfera.it 
web: www.emisfera.it 



_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/7f2c5744/attachment.html>