[cisco-voip] Click to dial

[Louis Koekemoer (ZA)]

Thanks for the reply. I have a Tac case open for this, as I hear your theory, but I have a 6.1.4 cluster where it works without devices associated. Must be a bug in 7.1.2.

--- original message ---
From: "Hussam Ahmad" <hahmad at sigma-it.net>
Subject: RE: [cisco-voip] Click to dial
Date: 6th December 2009
Time: 4:44:33 pm


This will never work without association of user with the phones, so to make 1500 you can use BAT there an option to add the users with the phones but you have to delete the 1500 phones and add them again using this option in order to achieve Click to Dial.

Thanks and best regards,

HUSSAM AHMAD




From: Louis Koekemoer (ZA) [mailto:Louis.Koekemoer at za.didata.com]
Sent: Tuesday, December 01, 2009 6:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Click to dial

I’m trying to deploy the Click to Dial application from Cisco, but we have a bit of a challenge. We get it working, but only once we associate a physical device to an end user, which obviously will be a pain implementing 1500 phones, and for future support. Please could someone assist?


Regards

Louis Koekemoer

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091206/bafb3d8c/attachment.html>