[cisco-voip] Teaming Dual NIC in MCS-7825H4 running CUCM 7.1.3

[Cristobal Priego]

On the CLI you type utils network failover And it act as a teaming you  
can connect both nics and if one fails the second will remain active

Sent from my iPhone

On Dec 16, 2009, at 7:26 AM, Anthony Kouloglou <akoul at dataways.gr>  
wrote:

> Hi all,
>
> I have seen that Windows Versions supported a driver that allowed  
> the second NIC of an MCS to be standby in case of error in the first  
> one.
>
> Can this behavior be achieved in CUCM 7.1.3 that runs on Linux?
>
>
>
> Thanks and Kind Regards
>
>
>
> Anthony Kouloglou
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091216/aa22355d/attachment.html>