[cisco-voip] Teaming Dual NIC in MCS-7825H4 running CUCM 7.1.3

[Anthony Kouloglou]

Hi Cristobal,
Thanks a lot.
As I checked in the CLI guide, the command is:
set network failover enable
and I can see that there is no reload need for it!!

Cheers
Anthony


________________________________________
From: Cristobal Priego [mailto:cristobalpriego at gmail.com] 
Sent: Wednesday, December 16, 2009 5:30 PM
To: Anthony Kouloglou
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Teaming Dual NIC in MCS-7825H4 running CUCM 7.1.3

On the CLI you type utils network failover And it act as a teaming you can connect both nics and if one fails the second will remain active

Sent from my iPhone

On Dec 16, 2009, at 7:26 AM, Anthony Kouloglou <akoul at dataways.gr> wrote:
Hi all,
I have seen that Windows Versions supported a driver that allowed the second NIC of an MCS to be standby in case of error in the first one.
Can this behavior be achieved in CUCM 7.1.3 that runs on Linux?
 
Thanks and Kind Regards
 
Anthony Kouloglou


 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip