[cisco-voip] 7916 BLF Speed Dials Re-Visited

Jason Aarons (US) jason.aarons at us.didata.com
Thu Dec 17 08:30:31 EST 2009


Is the Subscribe CSS setup correctly?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate Aliberto
Sent: Thursday, December 17, 2009 7:28 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7916 BLF Speed Dials Re-Visited

 

All,

 

During a recent CUCM 7.12 installation I deployed a series of 7965s with
attached 7916(24-line) expansion modules for several attendants.  I
created a Softkey Template to implement the 7916 lines as BLF SDs and
populated the appropriate information.  The final result is that the
Speed Dial functionality works impeccably, however the Busy Lamp Field
doesn't provide a status indication even when the BLF SD target DN is
off hook.

 

I'm trying to figure out if I missed something/made an error in the
system configuration or if anyone has had this issue in the past and has
discovered a work-around.

 

Thanks,

 

Nate




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091217/d3d6ce6c/attachment.html>


More information about the cisco-voip mailing list