[cisco-voip] 7916 BLF Speed Dials Re-Visited

[Nate Aliberto]

John,

 

As expected, adding the proper subscribed calling search space worked
perfectly.

 

Thanks again!

 

-Nate

 

From: Leschinskey, John [mailto:jleschins at RADFORD.EDU] 
Sent: Thursday, December 17, 2009 8:34 AM
To: Nate Aliberto
Subject: RE: 7916 BLF Speed Dials Re-Visited

 

Not a  problem.  Let me know if there is anything else.  I just did this
the other day, also so it was fresh in my mind.  J  It is a very easy
step to miss when you are trying to get things done. 

 

John 

 

John Leschinskey

Network Services

Radford University

540.831.7774

 

From: Nate Aliberto [mailto:nate at aliberto.net] 
Sent: Thursday, December 17, 2009 8:30 AM
To: Leschinskey, John
Subject: RE: 7916 BLF Speed Dials Re-Visited

 

John,

 

I think you hit on the exact problem, I'm sure I missed this step!

Thanks for the quick reply.

 

Nate

 

From: Leschinskey, John [mailto:jleschins at RADFORD.EDU] 
Sent: Thursday, December 17, 2009 8:05 AM
To: Nate Aliberto
Subject: RE: 7916 BLF Speed Dials Re-Visited

 

Hello Nate,

 

I have had problems with that as well sometimes.  You want to verify
that you presence group is able to be reached by the line numbers search
space.    This is a step that I have manage to miss a couple times when
configuring.    It should be the css as your line numbers.   Here you
will see mine, in the Subscribe calling search space.    This option is
on the device set up of the phone not inside the line set up.

 

 

Protocol Specific Information 

Packet Capture Mode 

	
Packet Capture Duration

	
Presence Group

	
Device Security Profile

	
SUBSCRIBE Calling Search Space

	
Unattended Port

Require DTMF Reception

RFC2833 Disabled

 

Hope this helps.

 

John 

 

 

John Leschinskey

Network Services

Radford University

540.831.7774

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate Aliberto
Sent: Thursday, December 17, 2009 7:28 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7916 BLF Speed Dials Re-Visited

 

All,

 

During a recent CUCM 7.12 installation I deployed a series of 7965s with
attached 7916(24-line) expansion modules for several attendants.  I
created a Softkey Template to implement the 7916 lines as BLF SDs and
populated the appropriate information.  The final result is that the
Speed Dial functionality works impeccably, however the Busy Lamp Field
doesn't provide a status indication even when the BLF SD target DN is
off hook.

 

I'm trying to figure out if I missed something/made an error in the
system configuration or if anyone has had this issue in the past and has
discovered a work-around.

 

Thanks,

 

Nate

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091218/b9d48d83/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 833 bytes
Desc: image001.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091218/b9d48d83/attachment.gif>