[cisco-voip] WAN voice policy voice-control

[Syed Khalid Ali]

This would allocate 8kbps for voice signaling traffic.


On Sun, Dec 20, 2009 at 7:21 AM, Scott Ingram <SIngram at clayton.com> wrote:

>  I have created a policy " see below" @ I am unclear on class
> voice-control bandwidth statement? is that for the call set up? I believe
> I'm missing something?
> !
> class-map match-any voice-control
>  match ip dscp af31
>  match access-group 101
> class-map match-any voice
>  match ip dscp ef
>  match access-group 100
> !
> !
> policy-map wan-edge
>  class voice
>     priority 6144
>  class voice-control
>     *bandwidth 8*
>  class class-default
>     fair-queue
>
> access-list 100 permit udp any any range 16384 32767
> access-list 101 permit tcp any any eq 2428
> access-list 101 permit udp any any eq 2427
>
>
> IMPORTANT NOTICE:
>
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Thanks,
Syed Khalid Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091220/e509e2fe/attachment.html>