[cisco-voip] WAN voice policy voice-control

[Ryan Ratliff]

Specifically you are assigning bandwidth only to MGCP signalling.  Your voice signaling should include all protocols that are going to be traversing the wan link.

-Ryan

On Dec 20, 2009, at 5:03 AM, Syed Khalid Ali wrote:

This would allocate 8kbps for voice signaling traffic.


On Sun, Dec 20, 2009 at 7:21 AM, Scott Ingram <SIngram at clayton.com> wrote:
I have created a policy " see below" @ I am unclear on class voice-control bandwidth statement? is that for the call set up? I believe I'm missing something?
!
class-map match-any voice-control
 match ip dscp af31
 match access-group 101
class-map match-any voice
 match ip dscp ef
 match access-group 100
!
!
policy-map wan-edge
 class voice
    priority 6144
 class voice-control
    bandwidth 8
 class class-default
    fair-queue
 
access-list 100 permit udp any any range 16384 32767
access-list 101 permit tcp any any eq 2428
access-list 101 permit udp any any eq 2427
 
IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




-- 
Thanks,
Syed Khalid Ali

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091220/6612db0b/attachment.html>