[cisco-voip] Aculab's Prosody X high density DSP SIP gateway card

Scott Ingram SIngram at clayton.com
Sun Dec 20 15:16:39 EST 2009


would any one have any input on this card solution tied into a UCM 6.1 environment?  I'm having RTP packet loss @ poor voice quality while agents audio path is connected to this end point.  This is an on premise call center solution provided by Noble.  The Aculab card holds a SIP trunk to UCM " both devices are on the same subnet".  I made sure my bandwidth capacity  is tuned for g.711 @ the amount of concurrent calls.  The WAN has established QOS.  Outside of this solution I don't encounter any packet loss, jitter @ poor voice quality..   Anyone's feedback would be greatly appreciated.
 
 

IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091220/54009945/attachment.html>


More information about the cisco-voip mailing list