[cisco-voip] Configuration issue

[Jim Reed]

Rob,
What does your current configuration look like?  What do you see when you do a debug isdn q931 and/or when you do a show controller t1 ...  Also, when dialing into the site, do a show voice port summary to see if you're even getting a ring detect on any of the channels.  Just some things to try.
--
Jim Reed
Technology Wrangler
Swift Communications, Inc.
970-683-5646 (Direct)
775-772-7666 (Cell)

"Somewhere, something incredible
is waiting to be known."
       Dr. Carl Sagan



On 12/24/09 7:32 AM, "Bellerose, Robert" <Robert.Bellerose at analog.com> wrote:

Anyone have the configuration white paper for a 5ess and a vwic t1 card on a 3845 router. Looking for the router side setup we have e&m-immediate currently and when calling into the site get dead air or fast busy. The circuit is clean according to the carrier.

Thanks
Rob



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091224/198a5fcc/attachment.html>