[cisco-voip] Integration between Router 2811 E1 and Panasonic PBX D5000 issue

Syed Khalid Ali syed.khalid.khursheed at gmail.com
Mon Dec 28 07:10:17 EST 2009


What do u mean by not working. Please explain? Also post the config of both
router

On Mon, Dec 21, 2009 at 2:51 AM, hady salah ashour <eng_hady1 at yahoo.com>wrote:

> Hi All ,
>
> Problem Details: i've installed an e1 card on cisco router 2811 to link the
> router to pbx
> pbx1---->e1---->router1-->wan--->rouer2--->fxo--->pbx2
> the call from pbx 1 to pbx 2 is working
> the call from pbx2 to pbx1 is not working
>
> the configuration on router 1
>
> voice translation-rule 1
>  rule 1 /03\(...\)/ /\1/
> !
> !
> voice translation-profile outgoing
>  translate called 1
>
>
> controller E1 0/3/0
>  framing NO-CRC4
>  ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis
> !
> voice-port 0/3/0:0
>  cptone EG
>
> dial-peer voice 9 pots
>  translation-profile outgoing outgoing
>  destination-pattern 03...
>  port 0/3/0:0
>
>  dial-peer voice 10 voip
>  destination-pattern 01....
>  session target ipv4:10.0.178.18
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
> please help me to solve this issue
>
> Thanks,
> Hady
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Thanks,
Syed Khalid Ali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091228/aac1d5b8/attachment.html>


More information about the cisco-voip mailing list