[cisco-voip] CM 7.1 stalling on snmp?

[Scott Voll]

Thanks Wes.  Thought it was just me.  it did finally  come up.

Scott

On Tue, Dec 29, 2009 at 1:54 PM, Wes Sisk <wsisk at cisco.com> wrote:

> concensus appears to be the first boot after upgrade should be slow. IBM is
> re-discovering hardware. Most report this taking upwards of 30 minutes. Let
> it get all the way through.  Subsequent reboots should proceed without the
> delay.
>
> survey says?
>
>
> On Tuesday, December 29, 2009 4:49:02 PM, Wes Sisk <wsisk at cisco.com><wsisk at cisco.com>wrote:
>
> other refererences to this say the server boots enough for ssh to start so
> you can ssh in and progress things with
> "utils service start Cisco Service Manager"
>
> Can you try that while I dig through the hits?
>
> /wes
>
> On Tuesday, December 29, 2009 4:21:29 PM, Scott Voll
> <svoll.voip at gmail.com> <svoll.voip at gmail.com> wrote:
>
> has anyone ever ran into an issue with 7.13 where the start up after
> install stalls on "snmp-mon-0.0.0.19-17"
>
> This is an IBM MCS 7825.
>
> Any ideas?
>
> Thanks
>
> scott
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091229/fac318bf/attachment.html>