[cisco-voip] Calls from Analog ATA186's dropping out after 20-30 minutes

[Dana Tong (AU)]

Good afternoon,

I have a customer who has reported problems with ATA186's dropping out for calls longer than 20 or 30 minutes. Has anyone seen this before and can recommend a course of action?

I am assuming that this problem is not related to FAX issues (pass-through or relay) because the reported problem is for long calls over 20 mins. (I can't recall too many FAX calls lasting longer than a minute or so) I'm guessing this setup is being used for an analog conference phone maybe?!?

Thanks guys.

Cheers
Dana


******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090205/cbccfcf7/attachment.html>