[cisco-voip] Problem with E1 in Cisco 2811

[Ignacio Lorenzo]

Hello,

I have a problem with my voice installation. I can´t make incoming/outgoing calls. It´s a new installation. I need your help as soon as possible.

This is "debug isdn Q931" command:

 *Feb  9 12:50:16.019: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref = 0x0004

        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA18384
                Preferred, Channel 4
        Calling Party Number i = 0x0183, '608224245'
                Plan:ISDN, Type:Unknown
        Called Party Number i = 0xA1, '913724076'
                Plan:ISDN, Type:National
*Feb  9 12:50:20.163: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref = 0x0004

        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA18384
                Preferred, Channel 4
        Calling Party Number i = 0x0183, '608224245'
                Plan:ISDN, Type:Unknown
        Called Party Number i = 0xA1, '913724076'
                Plan:ISDN, Type:National
*Feb  9 12:50:24.695: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8  callref = 0
x0004
        Cause i = 0x82E6333033 - Recovery on timer expiry
GV_Gerencia01#
GV_Gerencia01#
*Feb  9 12:50:55.127: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8  callref = 0x00
04
        Cause i = 0x82E6333035 - Recovery on timer expiry
*Feb  9 12:50:59.627: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8  callref = 0x00
04
        Cause i = 0x82E6333038 - Recovery on timer expiry
*Feb  9 12:51:04.139: ISDN Se0/0/0:15 Q931: RX <- RESTART pd = 8  callref = 0x00
00
        Channel ID i = 0xA18384
                Preferred, Channel 4
        Restart Indicator i = 0x80
*Feb  9 12:53:04.159: ISDN Se0/0/0:15 Q931: RX <- RESTART pd = 8  callref = 0x00
00
        Channel ID i = 0xA18384
                Preferred, Channel 4
        Restart Indicator i = 0x80
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
GV_Gerencia01#
*Feb  9 12:58:53.623: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8  callref = 0x0005

        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA18385
                Preferred, Channel 5
        Calling Party Number i = 0x0183, '608224245'
                Plan:ISDN, Type:Unknown
        Called Party Number i = 0xA1, '913724076'
                Plan:ISDN, Type:National
*Feb  9 12:58:57.651: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8  callref = 0x0005

        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA18385
                Preferred, Channel 5
        Calling Party Number i = 0x0183, '608224245'
                Plan:ISDN, Type:Unknown
        Called Party Number i = 0xA1, '913724076'
                Plan:ISDN, Type:National
*Feb  9 12:59:02.143: ISDN Se0/0/1:15 Q931: RX <- DISCONNECT pd = 8  callref = 0
x0005
        Cause i = 0x82E6333033 - Recovery on timer expiry

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090209/31fd2212/attachment.html>