[cisco-voip] 7200VXR as Session Border Controller/CUBE

[Alex Balashov]

This is something different.  I was assuming you were running plain IOS.

chris.flav at yahoo.ca wrote:

> :-0. 
> 
> http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/product_data_sheet09186a00801da698.html
> 
> So i am assuming others will second this opinion that CUBE is not offerring SBC-like functionality?
> 
> -----Original Message-----
> From: Alex Balashov <abalashov at evaristesys.com>
> 
> Date: Fri, 13 Feb 2009 17:43:47 
> To: Peter Slow<peter.slow at gmail.com>
> Cc: <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] 7200VXR as Session Border Controller/CUBE
> 
> 
> Cisco.com is marketing.
> 
> Peter Slow wrote:
> 
>> cisco.com disagrees, is there a particular document you were reading
>> that indicated that?
>>
>> -Peter
>>
>> http://www.cisco.com/en/US/products/hw/routers/ps341/index.html
>>
>> On Fri, Feb 13, 2009 at 5:31 PM, Alex Balashov
>> <abalashov at evaristesys.com> wrote:
>>> Among other things, you can't hairpin SIP-to-SIP calls on that platform (as
>>> far as I know).
>>>
>>> Alex Balashov wrote:
>>>
>>>> A Cisco VFC router is not an SBC.
>>>>
>>>> chris.flav at yahoo.ca wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> We are looking to deploy a SBC for SIP subscribers and are looking at
>>>>> using a 7204VXR.  We are not needing transcoding facilities but simply
>>>>> forwarding SIP INVITES and signalling to and from a SIP gateway to
>>>>> subscriber endpoints.
>>>>>
>>>>> The documentation regarding the setup of such a system is terse,
>>>>> therefore any pointers to related information or example configs would
>>>>> be appreciated.
>>>>>
>>>>> I have looked at
>>>>> http://www.ciscosystems.com/en/US/docs/ios/voice/cube/configuration/guide/12_4t/vb_12_4t_book.html
>>>>>  however I am not seeing any info on the following:
>>>>>
>>>>> - RADIUS authentication of SIP registrations?
>>>>> - different SIP gateways based on realms/fqdn?
>>>>>
>>>>> Does anyone have the most basic snippets required to allow for:
>>>>>
>>>>> - SIP gateway behind NAT
>>>>> =====================
>>>>> it has to be more than:
>>>>> !
>>>>> ip nat sip-sbc
>>>>>  proxy [inside.ip.address] 5060 [outside.ip.address] 5060 protocol udp
>>>>>  mode allow-flow-around
>>>>>  session-timeout 300
>>>>>  override address
>>>>>
>>>>> - RADIUS auth ?
>>>>>
>>>>> - REGISTER to SIP gateway (proxying?)
>>>>>
>>>>> Do we need to use the sip-ua for this?
>>>>>
>>>>>
>>>>> Thanks in advance,
>>>>>
>>>>> C. Flav
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> cisco-voip at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>> --
>>> Alex Balashov
>>> Evariste Systems
>>> Web    : http://www.evaristesys.com/
>>> Tel    : (+1) (678) 954-0670
>>> Direct : (+1) (678) 954-0671
>>> Mobile : (+1) (678) 237-1775
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
> 
> 


-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (678) 237-1775