[cisco-voip] DID

[Larry Hadrava]

Antonio:
Without knowing the full infrastructure - the simple answer is creating a dail-peer to allow the DID functionality on the gateway such as:

dial-peer voice 1 pots
direct-inward-dial
incoming called-number .

Larry H.


  ----- Original Message ----- 
  From: António Fragoso 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, February 16, 2009 1:44 PM
  Subject: [cisco-voip] DID


                  Hi 

  I am lookin for the best information to configuring DID for Callmanger with a PRI E1 on the voip Gateway

   

   

  Antonio Fragoso



  BAI Cabo Verde, S.A.

  Departamento de Infraestrutura e Comunicaçao

  Edifício Santa Maria, 1º Andar

  Chã de Areia - Praia, Cx. Postal - 459

  Santiago, Cabo Verde

  Tel.: +238 260 1224/26

  Fax: +238 262 2810

  antonio.fragoso at bancobai.cv

  www.bancobai.cv

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090216/be9ccdfa/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090216/be9ccdfa/attachment.jpe>