[cisco-voip] ac on 6.1 question

[Jason Aarons (US)]

You have to set it up from scratch it doesn’t get completely setup.  Follow the online help for Attendant Console, go thru the checklist step by step.

 

 

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman, Edward
Sent: Monday, February 16, 2009 3:38 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] ac on 6.1 question

 

 I just upgraded from 4.1. to 6.1.3 and am unable to get the new attendant console software to function.  It dies on initializing call control. 

 

I checked the users, passwords and associations to the “ac” user don’t see a problem.  Have opened up a TAC case but just wondering if anyone had any ideas while I am waiting.



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090216/fe4ee394/attachment.html>