[cisco-voip] Billing server setup

[Michael Back]

I checked the service parameters and CDR is enabled.

>>> Samuel Womack <womacksamuel at gmail.com> 02/17/09 6:16 PM >>>
How about the Service Parameter...CDR is Disabled by default..

This setting is near the Top...

On Feb 17, 2009, at 4:23 PM, Michael Back wrote:

> I am trying to figure out how the CDR export for billing servers works
> on UCM7.  I have an FTP server setup to test this temporarily.  I have
> configured the billing application server parameters with the IP,
> username, password, and path.  Protocol is FTP for now.  Enterprise
> parameters for CDR is set to 1.  I made a few calls on the cluster,  
> but
> no files are being exported to the ftp.  I tested ftp access using the
> same username and password, and everything works fine.  What am I  
> doing
> wrong?  Thanks for your help.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip