isingh68 at gmail.com
Tue Feb 17 23:43:32 EST 2009
> Hello Antonio:
> Your situation as you describe it...
> H232 voice Gateway - E1 PRI
> PTSN num - 2602300
> Phone ext num 3xx
> I want that when peopel call 2603301 it go to ext 301 and so on
> Not knowing what you have configured so far I will start from the
> beginning. Pardon me if I am repeating things you have already done...
> 1. Configure a pots dial peer to accept DID:
> dial-peer voice x pots
> incoming called-number .
> 2. Configure a voip dial peer to have the CallManager process incoming
> dial-peer voice y voip
> destination-pattern 26023..
> session target ipv4:your_call_manager_ip
> 3. Configure a translation pattern and specify "26023XX", in the called
> party transformation text box specify "3XX"
> 4. Configure phone with 3xx numbers
> This should do the trick for inbound calling.
> I hope this helps.
> Regards. Inder.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the cisco-voip