[cisco-voip] Barge function key on CCM

Lelio Fulgenzi lelio at uoguelph.ca
Sun Feb 22 08:32:37 EST 2009


For 4.1(3): 

Device > Device Settings > Softkey Template 

Find the template you are using, click on it and then click on "Configure Softkey Layout" in the top right hand side. 

I believe the one you are looking for is Remote in Use. 

Once a shared line is in use, you will have the Barge or cBarge softkey visible. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "davidytk" <davidytk at netvigator.com> 
To: cisco-voip at puck.nether.net 
Sent: Sunday, February 22, 2009 12:43:48 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Barge function key on CCM 




Hi All 



I am now using CCM 4.1.2, I want to enable barge function key on CCM for IP Phone. I have already enable the barge function on the service. However I cannot find any barge key on the IP Phone in the phone softkey template. 



How can I add the key on the phone? 



Thanks 



David 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090222/34725e79/attachment.html>


More information about the cisco-voip mailing list