[cisco-voip] Barge function key on CCM

[davidytk]

Hi

For the privacy parameter, is it enable on enterprise parameters or in phone
setting.

-----Original Message-----
From: dschulz at skyline-ats.com [mailto:dschulz at skyline-ats.com] 
Sent: Sunday, February 22, 2009 9:49 PM
To: davidytk; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Barge function key on CCM

The barge key is enable as long as you have the built-in bridge enabled and
privacy is disabled on the phone.  See the enterprise parameters.   Keep in
mind, that privacy is on by default.  So, on the bargee phone, configure a
privacy button on the template and turn off privacy.  HTH

-----Original Message-----
From: davidytk <davidytk at netvigator.com>
Sent: Sunday, February 22, 2009 12:43 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Barge function key on CCM

Hi All

 

I am now using CCM 4.1.2, I want to enable barge function key on CCM for IP
Phone. I have already enable the barge function on the service. However I
cannot find any barge key on the IP Phone in the phone softkey template.

 

How can I add the key on the phone?

 


[The entire original message is not included]