[cisco-voip] Cisco VG224 and Polycom Analog phone

[Lelio Fulgenzi]

You'll likely have to enable the feature codes for adding people to conference calls using hookswitch commands. 

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Bill Webber" <Bill.Webber at tri-c.edu> 
To: cisco-voip at puck.nether.net 
Sent: Monday, February 23, 2009 10:27:27 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Cisco VG224 and Polycom Analog phone 




We’re having trouble using Polycom analog conference phones via a VG224. On the old system (Nortel) we would use the “flash” key, call the next participant, hit flash until we reached the maximum number of participants (6). 



How do we make this work in Cisco world???? 



Thanks, 



Bill Webber 



216-987-4372 

Bill.webber at tri-c.edu 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090223/192bb821/attachment.html>