[cisco-voip] Cisco VG224 and Polycom Analog phone

miken miken miken at sisna.com
Tue Feb 24 11:53:00 EST 2009


If you reconfigure the gateway for SCCP, there are feature access codes
available for conference, transfer, meetme, etc. This URL should give you
the information you need to configure it.

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

Thank you
Mike N

On Mon, Feb 23, 2009 at 8:27 AM, Webber, Bill <Bill.Webber at tri-c.edu> wrote:

>  We’re having trouble using Polycom analog conference phones via a VG224.
> On the old system (Nortel) we would use the “flash” key, call the next
> participant, hit flash until we reached the maximum number of participants
> (6).
>
>
>
> How do we make this work in Cisco world????
>
>
>
> Thanks,
>
>
>
> Bill Webber
>
>
>
> 216-987-4372
>
> Bill.webber at tri-c.edu
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090224/0ba1b7dc/attachment.html>


More information about the cisco-voip mailing list