[cisco-voip] incoming called-number

[Scott Kee]

what kind of issue am I going to experience if i don't have incoming called number command  in the dial-peer voice 1 voip?
incoming called-number .

i have CM 6.1 and using H323 gateway using C2811 router.

i have no issue making incoming calls from outside to inside but since i am missing incoming called command, am i going to have any issues with
inside calling out?


voice-port 0/1/0
signal groundStart
output attenuation 0
timing hookflash-out 50
connection plar 16111
caller-id enable

dial-peer voice 1 voip
description MPLS_TO_CCM
destination-pattern 16...
progress_ind setup enable 1
progress_ind progress enable 1
voice-class codec 1
voice-class h323 1
session target ipv4:10.0.160.21
dtmf-relay h245-alphanumeric
no vad


dial-peer voice 10 pots
description (Off-Net LD Calls)
destination-pattern 71[2-9]..[2-9]......
port 0/0/0
forward-digits 11
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090223/4ab1a99f/attachment.html>