[cisco-voip] Registering CME 7.0 with SIPGATE

[Zahid Hassan]

Dear All,


Has anyone managed to register CME with SIPGATE ?

Below is my SIP config and registration status :

!
sip-ua 
 authentication username 02033934025 password 7 YYYYYYYYYYYYYYY
 no remote-party-id
 set pstn-cause 6 sip-status 503
 set pstn-cause 18 sip-status 408
 set pstn-cause 27 sip-status 502
 set pstn-cause 31 sip-status 480
 set pstn-cause 44 sip-status 503
 set pstn-cause 58 sip-status 503
 set pstn-cause 88 sip-status 503
 set pstn-cause 95 sip-status 503
 set pstn-cause 102 sip-status 504
 set pstn-cause 111 sip-status 500
 retry invite 4
 retry response 3
 retry bye 2
 retry cancel 2
 retry register 10
 retry options 1
 timers trying 1000
 timers expires 100000
 timers connect 100
 timers disconnect 300
 timers register 250
 registrar dns:sipgate.co.uk expires 3600
 sip-server dns:sipgate.co.uk
!
voice service voip 
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
!

CME-7.1#sh sip-ua register status 
Line          peer           expires(sec)  registered   P-Associated-URI
============  =============  ============  ===========  ================
02033934025                       20007       76            no          
102                               20002       24            no          
103                               20003       28            no          
104                               20004       26            no  




Any comment or working config sample will be greatly appreciated.


Regards,


ZH

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090224/8448c433/attachment.html>