[cisco-voip] Remove Mirrored Disk Before Upgrading from Unity 4.2.1 to Unity 7.0(2) ???

Miller, Steve MillerS at DicksteinShapiro.COM
Wed Feb 25 08:56:33 EST 2009


One of my managers would like to remove the second disk before the
upgrade so that if we have any major issues (total system crash, etc),
we can just replace the main disk with the mirrored disk that we removed
and go back to status quo.  Is this a good idea?
 

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 

 

--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
named above. This communication may contain material protected by attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible for delivering this confidential
communication to the intended recipient, you have received this communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, 
received, or sent on its network.  If you have received this confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

==============================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090225/afd1ece0/attachment.html>


More information about the cisco-voip mailing list