[cisco-voip] MGCP config

Aman Chugh aman.chugh at gmail.com
Thu Feb 26 00:55:16 EST 2009


Check the codec settings for the call, looks to be codec mismatch. Also
check the region of the gateway and the ip phone and check your codec
settings.
HTH

Aman

On Thu, Feb 26, 2009 at 11:00 AM, cisco.voip <cisco.voip at verizon.net> wrote:

> I have CCM 4.2, with an MGCP IOS 2811 PRI gateway.  Outbound calling is
> working properly, however inbound calls
> the IP Phone rings once and the call is disconnect.
> Everything is registered properly and my debug isdn returns a ' resource
> unavalable', call cleared.
>
> any idea's, do I need a dial peer for the inbound calls?
>
> Thanks
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090226/da96b2ff/attachment.html>


More information about the cisco-voip mailing list