[cisco-voip] Using a third-party SIP phone with CallManager Express

[Nick Matthews]

It looks like this:

voice service voip
sip
 registrar server

voice register global
mode cme
source-address x.x.x.x port 5060
max-dn X
max-pool X

voice register dn  1
number xxxx

voice register pool  1
id mac XXXX.XXXX.XXXX
type <type of phone>  ! ignore if 3rd party
number 1 dn 1
username X password X

Authentication is required if the phone's IP address is in different
subnet than the source-address.

-nick




On Thu, Feb 26, 2009 at 11:59 AM, Philip Walenta <pwalenta at wi.rr.com> wrote:
> Has anyone successfully registered a third-party phone (like a Grandstream
> or other) to CallManager express?
>
> If so do you have a CME config?
>
> I'm trying to register some SIP devices to a CME (I've been told it can be
> done), and cannot seem to find the right debugs or anything to figure out
> what is wrong in my config!
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>