[cisco-voip] replacing disks under new linux O/S

[Lelio Fulgenzi]

I did a "show hardware" at the CLI and it gives disk stats. I'm hoping when I remove and insert the disk it will say rebuilding and so much percent. 

----- Original Message ----- 
From: "Jason Aarons (US)" <jason.aarons at us.didata.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, cisco-voip at puck.nether.net 
Sent: Sunday, January 11, 2009 10:46:50 PM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] replacing disks under new linux O/S 




Step 5, how do you pull up the HP/Compaq RAID Array Utility under Platform CLI? I have no idea but would also like to know. 



This is a good example where the Appliance model is tougher than Windows. In Windows you could pull up GUI, or watch Event Viewer to confirm raid rebuild status. Here they have to map a CLI/WebInterface into the HP ACU-CLI. 



HP Array Configuration Utility CLI for Linux 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=428936&prodNameId=3288114&swEnvOID=2065&swLang=8&mode=2&taskId=135&swItem=MTX-673eb0ec605b4a2bac35ebb18c 



This needs a re-write for Platform OS! 

http://www.ciscosystems.com/application/pdf/paws/9229/disk_redundancy_mcs_9229.pdf 









From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Sunday, January 11, 2009 10:30 PM 
To: cisco-voip voyp list 
Subject: [cisco-voip] replacing disks under new linux O/S 




I've got a bad disk I need to replace in a Unity Connection 7 installation. I haven't replaced a disk on a linux based appliance yet and I'm just wondering what the procedure is and how I monitor the RAID rebuild. 

In the olden days, we use to: 

    1. shut down the server 
    2. remove the disk 
    3. turn up the server (press F2, F1 to keep the RAID config in broken mode) 
    4. insert disk 
    5. monitor using HP/Compaq utility 


I suspect it's going to be something close to this, since it's still an HP, I'm guessing the F2, F1 sequence still exists, but I'm wondering what the monitoring software is going to be. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 






Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090111/612881d7/attachment.html>