[cisco-voip] Two CUE in Single 2851

[Steve G]

I believe a 2851 has only 1 NM slot.  one EVM slot and the slot next to the
NM is for an ethernet blade.  Someone please confirm.  I don't think this
will work unless you are moving an AIM-CUE to the 2851...then it would be
physically possible, but im not sure if it is a supported scenario.

On Mon, Jan 12, 2009 at 9:05 AM, Pritchard, Jon <Jon_Pritchard at adp.com>wrote:

> I have a customer who is consolidating operations.  One of the
> requirements is to move an existing CUE from one voice gateway and add
> it to a 2851 voice gateway which already has a CUE module.  Anyone have
> any experience with having two CUE's in one voice gateway?
> Fundamentally I cannot see an issue but I wanted to know if there are
> any gotcha's out there.
>
> Also, any issues with changing IP's of CUE?
>
> Jon Pritchard - Sr. Network Engineer
> ADP Network Solutions Group
> phone: (503) 205-4428
> fax: (503) 205-7228
>
>
>
>
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and confidential.
> If the reader of the message is not the intended recipient or an authorized
> representative of the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please notify us immediately by e-mail
> and delete the message and any attachments from your system.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090112/fa31c7c4/attachment.html>