[cisco-voip] how to monitor "switch version request"

[Ryan Ratliff]

I think you'll get the shutdown process output just by being  
connected to it.

-Ryan

On Jan 12, 2009, at 4:57 PM, Lelio Fulgenzi wrote:

After an upgrade, I get the following:

Successfully installed UCSInstall_UCOS_7.0.1.21015-1.sgn.iso

The system upgrade was successful.  A switch version request has been  
submitted.  This can take a long time depending on the platform and  
database size.  Please continue to monitor the switchover process  
from the Cisco Unified Communications OS Platform CLI.  Please verify  
the system restarts and the correct version is active.

Anyone know what the CLI command is to monitor the switch version?



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090112/6c00bf40/attachment.html>