[cisco-voip] how to monitor "switch version request"

[Lelio Fulgenzi]

I had it set to restart automatically, so that was good. but in the future i won't, so i'll need to monitor the process. 

----- Original Message ----- 
From: "Ryan Ratliff" <rratliff at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Monday, January 12, 2009 5:09:50 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] how to monitor "switch version request" 

I think you'll get the shutdown process output just by being connected to it. 




-Ryan 


On Jan 12, 2009, at 4:57 PM, Lelio Fulgenzi wrote: 


After an upgrade, I get the following: 



Successfully installed UCSInstall_UCOS_7.0.1.21015-1.sgn.iso 


The system upgrade was successful. A switch version request has been submitted. This can take a long time depending on the platform and database size. Please continue to monitor the switchover process from the Cisco Unified Communications OS Platform CLI. Please verify the system restarts and the correct version is active. 


Anyone know what the CLI command is to monitor the switch version? 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090112/ee0e6b65/attachment.html>