[cisco-voip] CallerID H323 IOS 12.4(22)

[Roush, David]

David

Was there ever a response to this with regards to receiving both
Name/Number? I never saw one on the list serve.

 

Thanks.
David

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Zhars
Sent: Wednesday, January 14, 2009 2:54 PM
To: Voice Noob; jbuchanan at ctiusa.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CallerID H323 IOS 12.4(22)

 

OK, now I get the name but no number!  Is there anyway to have both??  

Thanks.




On Wed, Jan 14, 2009 at 2:34 PM, David Zhars <dzhars at gmail.com> wrote:

Yep, it's T.

So I need the 'isdn supp service name-calling'?  

I will give that a shot!

 

On Wed, Jan 14, 2009 at 11:16 AM, Voice Noob <voicenoob at gmail.com>
wrote:

I can confirm that you need .T . I just did this last night, Started
with mainline and the commands are not there. Switched to .T and works
like a champ. 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, January 14, 2009 9:54 AM
To: David Zhars
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CallerID H323 IOS 12.4(22)

 

David--

 

you said 12.4.22...... is this T or not.  My understanding to get it
native (without TCL script) you have to have a minimum of 12.4.20T.
main line would not cover that(at least that is my understanding).

 

Scott

On Wed, Jan 14, 2009 at 5:33 AM, David Zhars <dzhars at gmail.com> wrote:

Hi All.

reconfigured my main VGW to H323.  I found a link which says you can now
get the name and number from CallerID with
H323, as long as you have version 12.4.

Yet when people call in on the ISDN line, they are just getting the
number and no name.

Relevant config portion:

voice class h323 1
  h225 timeout tcp establish 3
 h225 display-ie ccm-compatible  (this is supposed to be the magic
line!)

controller T1 0/1/0
 pri-group timeslots 9-24

interface Serial0/1/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 no cdp enable

no ccm-manager fax protocol cisco
!
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp

num-exp 8812 1752

Now, the number I am testing with is 555-8812.  Which when it comes in,
we convert it to 1752 and CCM pushes that to 1712.  
Is it possible with all the number translating and routing I am losing
the Caller ID name?  Or is this just a pipe dream and the only way
to get Caller ID Name is with MGCP?

Thanks anyone!





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 

 


CONFIDENTIALITY NOTICE: 
This e-mail and any attachments contain information from 
the law firm of McKenna Long & Aldridge LLP, and are 
intended solely for the use of the named recipient or 
recipients. This e-mail may contain privileged 
attorney/client communications or work product. Any 
dissemination of this e-mail by anyone other than an 
intended recipient is strictly prohibited. If you are not a
named recipient, you are prohibited from any further 
viewing of the e-mail or any attachments or from making any 
use of the e-mail or attachments. If you believe you have 
received this e-mail in error, notify the sender 
immediately and permanently delete the e-mail, any 
attachments, and all copies thereof from any drives or 
storage media and destroy any printouts of the e-mail or 
attachments.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090115/78c34dee/attachment.html>