[cisco-voip] Going from Unity Voicemail 5x to Unity Unified Messaging (with Exchange) 5x

[Matthew Loraditch]

I think Jason is talking about MS CALs and I don’t think there is a way around this from the MS Licensing side..

[cid:image001.jpg at 01C97A32.66A73F40]
Matthew Loraditch
10944 Beaver Dam Road, Suite A
Hunt Valley, Maryland  21030
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Monday, January 19, 2009 12:28 PM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Going from Unity Voicemail 5x to Unity Unified Messaging (with Exchange) 5x

I recall there was a way to have UM/VM together so you didn't eat up those UM licences. But I think that strategy is changing. From the Unity 7.0 datasheet:
________________________________

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/data_sheet_c78-478111.html



Licensing
All user and interoperability functions are now offered under a single, low-cost user license that can be used for either voicemail or unified messaging. Additionally, port and session capacity and failover redundancy licensing is available in two sizes: 32 ports or sessions and 200 ports or sessions.
________________________________

Here's some info on "mixed mode"

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/white/paper/cuumvme.html




---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Jason Aarons (US)" <jason.aarons at us.didata.com>
To: cisco-voip at puck.nether.net
Sent: Monday, January 19, 2009 12:11:22 PM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] Going from Unity Voicemail 5x to Unity Unified Messaging (with Exchange) 5x


I’m have some Unity voicemail users that don’t have Outlook/Exchange mailbox.

I don’t want to burn an Exchange CAL for these voicemail only mailboxes, so I’m trying to understand what options we might have under Unity Unified Messaging (with Exchange 5x)
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090119/756c26e4/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33011 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090119/756c26e4/attachment.jpg>