[cisco-voip] Going from Unity Voicemail 5x to Unity Unified Messaging (with Exchange) 5x

[Jason Aarons (US)]

I need to read up on this Unity 5x Mixed Mode and what it can do.  Looks like I point voicemail only to the old existing Unity Voicemail Off Box Message Store and then Unified users to production Outlook/Exchange.

 

I’ve never done this, I’ll read up later today.

 

Much thanks Lelio -jason

 

 

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Monday, January 19, 2009 12:28 PM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Going from Unity Voicemail 5x to Unity Unified Messaging (with Exchange) 5x

 

I recall there was a way to have UM/VM together so you didn't eat up those UM licences. But I think that strategy is changing. From the Unity 7.0 datasheet:

________________________________

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/data_sheet_c78-478111.html

 

Licensing

All user and interoperability functions are now offered under a single, low-cost user license that can be used for either voicemail or unified messaging. Additionally, port and session capacity and failover redundancy licensing is available in two sizes: 32 ports or sessions and 200 ports or sessions.

________________________________


Here's some info on "mixed mode"

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/white/paper/cuumvme.html




---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Jason Aarons (US)" <jason.aarons at us.didata.com>
To: cisco-voip at puck.nether.net
Sent: Monday, January 19, 2009 12:11:22 PM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] Going from Unity Voicemail 5x to Unity Unified Messaging (with Exchange) 5x




I’m have some Unity voicemail users that don’t have Outlook/Exchange mailbox.

 

I don’t want to burn an Exchange CAL for these voicemail only mailboxes, so I’m trying to understand what options we might have under Unity Unified Messaging (with Exchange 5x)

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090119/0aa18379/attachment.html>