[cisco-voip] utilization reports on a T1 PRI connection

[Voll, Scott]

correct

-----Original Message-----
From: Kelemen Zoltan [mailto:keli at carocomp.ro]
Sent: Sunday, January 18, 2009 11:47 PM
To: Erick Bergquist
Cc: Voll, Scott; Cisco VoIPoE List; Carlos Ortiz; Chris Clouse
Subject: Re: [cisco-voip] utilization reports on a T1 PRI connection

Number of voice calls on a E1 is PRI usage, isn't it? The OIDs
discussed/used in that thread show DS0 (E1/T1 channels) usage on
DS1(E1/T1) ports, so it's independent whether it's E1 or T1.

regards,
  Zoltan

Erick Bergquist wrote:
> Is the link below still good for getting this PRI info into a cacti
> graph? The link is showing E1 information and not info relating to PRI
> usage.  I'm stumbling around creating my own and finding all the
> correct OIDs so rather use an existing template if there is one.
>
> Thanks.
>
> On Mon, Oct 13, 2008 at 3:15 PM, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>> We are currently using the graph / template at the bottom of this link.
>>
>>
>>
>> http://forums.cacti.net/viewtopic.php?t=20443
>>
>>
>>
>> Scott
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>