[cisco-voip] utilization reports on a T1 PRI connection

[Erick Bergquist]

Ok, my bad. Those work fine. I had a mix of H323/MGCP gateways and
wasn't getting anything back on one but it was a MGCP gateway and that
MIB doesn't get updated for MGCP PRIs.

Thanks.

On Wed, Jan 21, 2009 at 10:24 AM, Voll, Scott <Scott.Voll at wesd.org> wrote:
> correct
>
> -----Original Message-----
> From: Kelemen Zoltan [mailto:keli at carocomp.ro]
> Sent: Sunday, January 18, 2009 11:47 PM
> To: Erick Bergquist
> Cc: Voll, Scott; Cisco VoIPoE List; Carlos Ortiz; Chris Clouse
> Subject: Re: [cisco-voip] utilization reports on a T1 PRI connection
>
> Number of voice calls on a E1 is PRI usage, isn't it? The OIDs
> discussed/used in that thread show DS0 (E1/T1 channels) usage on
> DS1(E1/T1) ports, so it's independent whether it's E1 or T1.
>
> regards,
>  Zoltan
>
> Erick Bergquist wrote:
>> Is the link below still good for getting this PRI info into a cacti
>> graph? The link is showing E1 information and not info relating to PRI
>> usage.  I'm stumbling around creating my own and finding all the
>> correct OIDs so rather use an existing template if there is one.
>>
>> Thanks.
>>
>> On Mon, Oct 13, 2008 at 3:15 PM, Voll, Scott <Scott.Voll at wesd.org> wrote:
>>
>>> We are currently using the graph / template at the bottom of this link.
>>>
>>>
>>>
>>> http://forums.cacti.net/viewtopic.php?t=20443
>>>
>>>
>>>
>>> Scott
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
>