[cisco-voip] Caller ID

[Howard, Chad]

Here's what I have:

Telco <------voice PRI----> Cisco 2821 <------voice T1 CAS----> Rolm PBX


For an inbound call, is it possible to pass caller id information from the telco PRI to the Rolm T1?   I'm told this would work if we had an Adtran in place of the Cisco 2821 - it was described as "D channel in-banding".

Thanks for any insight.

CONFIDENTIALITY NOTICE: 
This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. 
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090122/11894298/attachment.html>