[cisco-voip] Cisco 2801 - PRI

[Jeffrey S. McNeal]

This was working in another router and I just moved the card. I might sound dumb but is it the router is not able to handle?
 
Jeffrey S. McNeal
Vision Technology Group, LLC
125 West Bruce Street
Harrisonburg, VA 22801
(540) 437-0112 - Office
(540) 437-0129 - Fax
 

________________________________

From: Paul [mailto:asobihoudai at yahoo.com]
Sent: Wed 7/1/2009 10:19 PM
To: Jeffrey S. McNeal; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco 2801 - PRI


You can fix it. You have to buy a new PVDM2 card and install it in your router to bring up all of the channels.

Paul

________________________________

From: Jeffrey S. McNeal <jmcneal at vtg.biz>
To: cisco-voip at puck.nether.net
Sent: Wednesday, July 1, 2009 10:17:08 PM
Subject: [cisco-voip] Cisco 2801 - PRI


Hello All,
 
I am trying to configure a pri on a cisco 2801 but I get the following message:
 
(config-controller)#pri-group timeslots 1-24
% Not enough DSP resources available to configure pri-group on controller T1 0/1
/1
% The remaining dsp resources are enough for 4 time slots.
% For current codec complexity, 2 extra dsp(s) are required to create this voice
 port.
 
Can I fix it or is something wrong?
 
 
Jeffrey S. McNeal
Vision Technology Group, LLC
125 West Bruce Street
Harrisonburg, VA 22801
(540) 437-0112 - Office
(540) 437-0129 - Fax
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090701/de4348de/attachment.html>