[cisco-voip] Cisco 2801 - PRI

[Mike Thompson]

Need to have PVDM2-XX (need 24 total channels total channels: type show diag
and look for PVDM, add em up and you'll get the total).

 

Keep in mind that a 2801 only supports a TOTAL of 30 PVDM channels.

 

2801 only supports 1 PRI, so if this isn't the first one, that's the issue.

 

Have to have ISDN switch type set first

 

Let me know what you get.

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeffrey S. McNeal
Sent: Wednesday, July 01, 2009 10:17 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco 2801 - PRI

 

Hello All,

 

I am trying to configure a pri on a cisco 2801 but I get the following
message:

 

(config-controller)#pri-group timeslots 1-24
% Not enough DSP resources available to configure pri-group on controller T1
0/1
/1
% The remaining dsp resources are enough for 4 time slots.
% For current codec complexity, 2 extra dsp(s) are required to create this
voice
 port.

 

Can I fix it or is something wrong?

 

 

Jeffrey S. McNeal

Vision Technology Group, LLC

125 West Bruce Street

Harrisonburg, VA 22801

(540) 437-0112 - Office

(540) 437-0129 - Fax

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090701/00417eff/attachment.html>