[cisco-voip] Cisco 2801 - PRI

[Voice Noob]

Correct. I was trying to clear up the idea that channels were equal to the
model of PVDM you purchased. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of PhilippG
Sent: Thursday, July 02, 2009 1:58 PM
To: Cisco Voip Mailinglist
Subject: Re: [cisco-voip] Cisco 2801 - PRI

Voice Noob wrote:
> You only need a PVDM-16 to bring up a 24 channel PRI.

Yes, but there is also a VIC2-4FXO in Slot 0, which needs half of the 
capacity of the PVDM2-8. So a PVDM2-32 is needed.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip