[cisco-voip] SURL to 7941 button using BAT?

[Jason Burns]

s/UDP/Device/g
Just replace UDP with device in that previous email and it should make
sense.

On Tue, Jun 30, 2009 at 12:46 PM, Countryman, Edward <
Edward.Countryman at provena.org> wrote:

>  thank you for the response.
>
>
>
> Not clear on how the UDP will update the actual phone device.  Could you
> possibly spell this out a bit more, I apologize for being dense but I just
> don’t see it.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Hennigh, Elexis
> *Sent:* Monday, June 29, 2009 5:40 PM
>
> *To:* Jason Burns
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] SURL to 7941 button using BAT?
>
>
>
> When you subscribe to the service and configure the SURL button on the UDP
> template it will subscribe and configure that button on any UDP ran against
> the template. I have done this rather often lately. Be careful though…if you
> have to run the BAT again for whatever reason be sure to remove the SURLs
> because it will subscribe to the service again and again if you let it. LOL!
> Removing several subscribed services to a bulk of UDPs is a pain! Haven’t
> discovered how to unsubscribe with the BAT. J
>
>
>
> Elexis Hennigh
>
> System Engineer
>
> Oklahoma State University
>
> 007a Cordell North
>
> Stillwater, OK 74078
>
> (405) 744-3137
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Countryman, Edward
> *Sent:* Sunday, June 28, 2009 9:50 AM
> *To:* Jason Burns
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] SURL to 7941 button using BAT?
>
>
>
> CCM 6.1.3
>
>
>
> I see options to change button template but don’t see a way to propagate
> the actual button SURL across a group of phones, just DN updates
>
> *From:* Jason Burns [mailto:burns.jason at gmail.com]
> *Sent:* Thursday, June 25, 2009 5:29 PM
> *To:* Countryman, Edward
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] SURL to 7941 button using BAT?
>
>
>
> What version of CUCM are you using? It's available under Update Device,
> Insert Device and, Insert User Device Profile, but the Service URL behavior
> has been changing a lot between versions.
>
>  On Thu, Jun 25, 2009 at 12:32 PM, Countryman, Edward <
> Edward.Countryman at provena.org> wrote:
>
> I need to add the same SURL to the second button on 300+ of my 7941
> phones.  The devices already have the correct button template but I am
> hoping to not have to do them all one at a time
>
> Anyone know if it's possible to add a SURL to a phone SURL-button using
> BAT?  I don't see it. Thoughts?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.12.94/2208 - Release Date: 06/29/09
> 14:43:00
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090706/3dcbe707/attachment.html>