[cisco-voip] 7925 set up

[Countryman, Edward]

Jason thank you.  This only works once a phone has registered with CCM.
Out of the box however there doesn't seem to be a way to access this
through the USB interface, which makes no sense.  

 

From: Jason Burns [mailto:burns.jason at gmail.com] 
Sent: Tuesday, July 07, 2009 5:58 PM
To: Countryman, Edward
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7925 set up

 

In the CCMAdmin under Device > Phone you can set the web page of the
phone to read only, or read/write. That would be one thing to check. The
only other thing I can think of is to get the right username and pass
from the 7925 admin guide.

On Tue, Jul 7, 2009 at 11:53 AM, Countryman, Edward
<Edward.Countryman at provena.org> wrote:

I have (50) 7925 wireless phones to set up and was hoping to use the USB
interface to configure wireless profiles and WLAN parameters since these
are required before CCM can see the phone.  However; unlike the 7921's
the set up webpage appears to be locked with no obvious way of unlocking
it.  What am I missing??
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090708/f2dce7e7/attachment.html>