[cisco-voip] 7925 set up

[Jason Burns]

In the CCMAdmin under Device > Phone you can set the web page of the phone
to read only, or read/write. That would be one thing to check. The only
other thing I can think of is to get the right username and pass from the
7925 admin guide.

On Tue, Jul 7, 2009 at 11:53 AM, Countryman, Edward <
Edward.Countryman at provena.org> wrote:

> I have (50) 7925 wireless phones to set up and was hoping to use the USB
> interface to configure wireless profiles and WLAN parameters since these
> are required before CCM can see the phone.  However; unlike the 7921's
> the set up webpage appears to be locked with no obvious way of unlocking
> it.  What am I missing??
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090707/fca7df42/attachment.html>