[cisco-voip] Converting 6509 to IOS from Hybrid, any affects on CMM?

[Leslie Meade]

Things like 6608 blades come to mind :)
I have the 6509's two IOS and one hybrid if it was not for that blade I would be ios 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Wednesday, July 08, 2009 8:17 AM
To: 'Dane'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Converting 6509 to IOS from Hybrid,any affects on CMM?

If you are using the older CCM Modules they do not work in IOS mode. Be careful. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dane
Sent: Wednesday, July 08, 2009 10:08 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Converting 6509 to IOS from Hybrid, any affects on CMM?

Currently have two 6509's each with CMM.  The 6509s are in hybrid mode.

Right now the CMM's basically have their own configuration that doesn't show up on the 6509's IOS or CatOS configs.  I am wondering if thats just because I am currently running in hybrid mode and that when I convert to IOS mode will that change?  Will the CMM be configured seperately as it is now or will that configuration get integrated into the IOS config of the switch as a whole?

Hope that makes sense.  Just wondering.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip