[cisco-voip] Mobile Voice Access

[Bob Fronk]

I have been struggling with setting up Mobile Voice Access.  If someone has this feature setup and working, I would appreciate a config sample.

Using UCM 6.1.2.1000-13

Incoming is PRI to VWIC2-1MFT-T1 in a 3825 router running 12.4(20)T1.

The setup is currently working for incoming / outgoing calls and we would like to add the Mobile Voice Access.   Mobile Connect is already configured and working.

Essentially, I have followed this article, but have had no luck getting this to work.  It is as if the number is not assigned.  We get "we're sorry, the number you have called is not in service".

http://edge.networkworld.com/community/comment/reply/32666/189184

I would appreciate any dial-peer configs that include a 10 digit DID number and any CUM config assistance.

Thanks for your help.

Bob




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090708/99ea7a40/attachment.html>