[cisco-voip] Mobile Voice Access

[Cristobal Priego]

I am running the exact same version of CUCM and there is a bug CSCsv08073

2009/7/8 Bob Fronk <bob at btrfronk.com>

>  I have been struggling with setting up Mobile Voice Access.  If someone
> has this feature setup and working, I would appreciate a config sample.
>
>
>
> Using UCM 6.1.2.1000-13
>
>
>
> Incoming is PRI to VWIC2-1MFT-T1 in a 3825 router running 12.4(20)T1.
>
>
>
> The setup is currently working for incoming / outgoing calls and we would
> like to add the Mobile Voice Access.   Mobile Connect is already configured
> and working.
>
>
>
> Essentially, I have followed this article, but have had no luck getting
> this to work.  It is as if the number is not assigned.  We get “we’re sorry,
> the number you have called is not in service”.
>
>
>
> http://edge.networkworld.com/community/comment/reply/32666/189184
>
>
>
> I would appreciate any dial-peer configs that include a 10 digit DID number
> and any CUM config assistance.
>
>
>
> Thanks for your help.
>
>
>
> *Bob*
>
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090708/ff8cf620/attachment.html>